What are the steps to replace front brake pads on a 2016 Jeep Patriot 2WD 2.0L?

To replace front brake pads on a 2016 Jeep Patriot 2WD 2.0L, you'll need a few tools such as a jack, jack stands, lug wrench, and a set of wrenches or ratchet/socket set. First, ensure your vehicle is on a flat surface and place wheel chocks on the rear tires for added stability. Next, using the lug wrench, loosen the lug nuts on the front wheels. Then, use the jack to lift the front of the vehicle and secure it on jack stands. Once the vehicle is securely raised, remove the lug nuts and take off the front wheels. Locate the brake caliper and remove the bolts holding it in place using the appropriate wrench or socket. Slide the caliper off the brake rotor and support it using a wire or bungee cord to prevent strain on the brake hose. Carefully remove the old brake pads from the caliper bracket and replace them with new ones. Slide the caliper back onto the brake rotor and reinsert and tighten the bolts. Finally, put the front wheels back on, tighten the lug nuts, and lower the vehicle off the jack stands. Lastly, double-check the lug nuts to ensure they are properly tightened, and test your brakes before driving to ensure they are working correctly.

This mind map was published on 8 January 2024 and has been viewed 87 times.